The printer cannot process the page quickly enough. 22 EIO X Buffer overflow Too much data was sent to the enhanced input/output (EIO) card in the specified slot [X]. Figure 35: Removing the optional duplexer, if installed Open the rear output bin and pull the extension outward until it stops. A: It is not uncommon for hp laserjet 4300 printers to loose their network connectivity especially since they were outfitted with the 615 network cards. Try printing the network configuration settings. Take the plastic front off, it's held by 2 torx screws.
The Alienation motor error.2. X Description 2- air-temperature sensor 3- DC controller 4- power supply Action Turn the printer off and then on. With more and more companies trying everything to save money they are going to third-party or rebuilt cartridges. HP LaserJet 4300 Printer Models HP Laser 4300 Printer Description HP LaserJet 4300 Printer Q2431A hp laserjet 4300 Base model HP Laser-Jet 4300n Printer Q2432A 80 MB RAM, expandable to 416 http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpl12422
One of the labels came off the backing sheet inside the printer. A stacker or stapler/stacker error has occurred. Replace the D.C. If the above action does not solve the issue, contact HP or authorized service provider.
If the message persists, contact HP Customer Support. Use the following Pin Codes:For LaserJet 4200 (11420002)For LaserJet 4300 (11430002)2. The stapler/stacker LED blinks in amber. 13.12.08, 13.12.09, 13.12.10 and 13.12.11 Jammed in the output device Jams in the output device (stapler stacker of stacker). Hp Laserjet 4200 And 4300 Series Printers Drivers Now press the UP or DOWN Arrow Buttons until the first digit of the Pin Code appears.6.
If a jam message persists, it is possible that paper is still jammed in the printer. The EIO accessory might be defective. If the error does not clear, turn the printer power off and then turn the printer power on. http://www.fixyourownprinter.com/posts/21972 If the sealing tab cannot be removed, insert a new print cartridge and return the faulty print cartridge to receive a replacement.
Continue to hold down the checkmark (Select) button until all three LEDs are illuminated. 5. Hp Laserjet 4200 Cartridge Installed Message X Description 1- Unknown misprint error 2- Beam-detect misprint error 4- No VSYNC error 7- Feed delay error 9- Signal noise error Action Press the (Select) button to continue or press Replace the toner cartridge.3. Just finished testing the baked card, and it works perfectly.Moe, many thanks!
Pull it out. The DC controller not communicating with the formatter LaserJet 4300 57.X PRINTER ERROR. 57.1, 57.2 fan error. Hp 4200 Error Codes HP COLOR LASER PRINTERS 4600, 5500 ERROR 59.0, 59.1, 59.21. Hp Laserjet 4250 Error Codes To view Help for a message (if available), press (Help).
Press select. Some do a really good job and replace as many parts as possible. by unknown on Jan 31, 2008 at 10:14am Add comment Please sign in to comment 0 Is there any way through vb code or otherwise to set the paper types?We have Cause The toner cart is jammed. Hp Laserjet 4200 Error Codes
HP LaserJet 4300 printer repair HP Laserjet 4300 printer repair 90009 Airport Worldway (City of LA) 91801 Alhambra Printer Repair 91802 Alhambra 91803 Alhambra 91001 Altadena 91006 Arcadia 91007 Arcadia 90071 Action Press the ? (Help) button for detailed information. These messages are not affected by the AUTO CONTINUE setting. top 50.4 FUSER ERROR Description The problem exists with the customer’s line voltage.
NOTE: 13.20 is a false paper jam error and there is a paper jammed behind the tray 1 assembly 13.06/13.12 Jams/Jam inside rear door There is a paper jam inside or Hp Laserjet 4250n 49.4c02 Service Error This document explains the message types, it lists and explains the numbered error messages, and provides recommended actions for resolving problems. Laser Printer Services sells only Genuine OEM Black HP Q1339A Toner Cartridge with 18,000 page yield.
Look for a jam in another location, contact HP, or contact an authorized service agent. If the toner gets on clothing, wipe it off with a dry cloth and wash the clothing in cold water. Action Open the top cover and remove the print cartridge. Reinstall the stapler/stacker or stacker.
Connectivity: The printer has a parallel port for connectivity. Figure 26: Opening rear door Remove any paper found. Known fixes Pressing the green GO button. controller board.HP LASER PRINTER 2300 ERROR 59.D, 59.E1.
The stacker or stapler/stacker was removed and then replaced with the printer power was on. 66.12.XX OUTPUT DEVICE FAILURE. Turn the printer off and then back on. If a message persists after performing all of the recommended actions, contact an HP-authorized service or support provider. The laserjet 4300 printer is unable to read the electronic information (e-label) on the print cartridge so that the printer can keep track of the page count for the print cartridge.
Figure 45: Disconnecting cables Grasp the cover on the right side of the printer and pull it firmly toward the rear of the printer until it stops. Figure 60: Sliding tray into printer After performing the actions above, press (Select) The page containing the error will automatically be reprinted if jam recovery is enabled. (Or, you might want