Home > Hp Laserjet > 60.3 Printer Error

60.3 Printer Error


LaserJet 9000/9040/9050 printer repair with error code 49.X A critical firmware error occurred. LaserJet 9000/9040/9050 printer error code 66.12.60 OUTPUT DEVICE FAILURE CHECK CABLES AND CYCLE POWER 66.12.3C An EEPROM error occurred . If the printer is already plugged into a wall outlet, try another power source in the building that is independent of the one currently being used. top 57.7 DUPLEX FAN FAILURE Description The cooling fan in the optional duplexer is not functioning. my review here

ERROR CODES HP laserjet 4250 error 21 Printer cannot process the page quickly enough Hp laser 4250 error 22 eio Printers eio card in the slot has overflowed its I/O Grasp both sides of the paper, and slowly pull the paper out of the printer. (There might be loose toner on the paper. If it is installed, remove the optional duplexer by lifting it up and then pulling it out. Figure 57: Turning the knob Load paper with the front side facing down and the top edge toward the front of the tray. https://www.orionmarket.com/product_error/2502/HP/HP-4200/60.3tray-3-lifter-motor-failure/

Hp 60.3 Printer Error

Check that all of the cables are connected to the HP Jetdirect card and that the HP Jetdirect card is seated properly. Click here for instructions on how to print a Configuration page. Ensure that tray is not over-filled or damaged.

It might be necessary to replace the specified DIMM. Error code 13.11.10 RESIDUAL JAM IN DELIVERY AREA 13.11.10 a page is jammed in the delivery area when the power is turned on or when the front door is closed. Look for the jam in another location, contact HP, or contact an authorized service provider. Hp Laserjet 4200 And 4300 Series Printers Drivers Warning messages Warning messages display information about data and print errors.

A page stopped in the registration area.

Error code13.11.08 JAM IN INPUT ACCESSORY

13.11.08 a page is jammed in the paper path at the vertical transfer unit registration area. 60.2 Printer Error Check the configuration of the HP Jetdirect card (EIO card). Error code 13.12.04 JAM IN LEFT ACCESSORY 13.12.04 Media is jammed in the flipper internal area. top top 40 EIO X BAD TRANSMISSION To continue press (Select) Description The connection has been broken abnormally between the printer and the EIO card (HP Jetdirect card) in the specified

Then, reinstall it. Hp Laserjet 4200 Cartridge Installed Message If the error persists, replace the stapler cartridge. On Sale About Us Contact Us Order Status FREE TECH SUPPORT (877) 755-5300 Login My Cart (0) Printers Printer Supplies Printer Parts Printer Accessories Error Codes Our technicians can help you The time now is 05:56 PM.

60.2 Printer Error

All images and logos used with permission from the respective owners. https://mindmachine.co.uk/products/HP_Texts/HP_LJ-P4010_-_ops_error-60_01.html top 79.XXXX PRINTER ERROR To continue turn off then on Description The printer detected a critical hardware error. Hp 60.3 Printer Error NOTE: If most of the paper is still inside the printer, it might be easier to remove it through the top-cover area. Hp Laserjet 4250 Error Codes Do not attempt to grasp the paper as it exits the duplexer to the output bin.

alternates with 64 PRINTER ERROR To continue turn off then on 66.00.15 EXTERNAL DEVICE FAILURE 66.12.XX OUTPUT DEVICE FAILURE For help press? 68.X PERMANENT STORAGE ERROR For help press ? this page Press the (Up Arrow) and (Down Arrow) buttons to step through the instructions and/or refer to the following steps. The leading edge of the media reached the fuser delivery sensor (PS502) within the specified time, but the trailing edge of the media did not reach the fuser-jam sensor (PS501) within The specific tray has experienced an error while lifting the media. 2. Hp Laserjet 4200 Error Codes

The stacker or stapler/stacker LED is continuously illuminated in amber. Error code 13.12.13 JAM IN LEFT ACCESSORY 13.12.0D Media stopped in the paper path. HP 9000 13.01.00 A page is jammed in the paper path at tray X feed area. get redirected here top 20 INSUFFICIENT MEMORY For help press ?

Turning the printer off and then on can clear some of these messages. Hp Laserjet 4250n 49.4c02 Service Error Action NOTE: Press the ? (help) button for detailed information about clearing the jam. We also use Google Analytics to track site usage patterns.

Reset the maintenance count on an HP LaserJet 4000, 4050, 4100, 5000 "The Short Cut Method" 1.

Figure 9: Removing the jammed paper Make sure that the paper is flat in the tray at all four corners and below the maximum-height indicators. If a jam message persists, it is possible that paper is still jammed in the printer. Reinstall all paper input trays. 13.98 Paper Jam Printing can continue, but unexpected responses might occur because an error occurred in permanent storage.

Open the rear output bin and remove. If you are printing from any tray except Tray 1, verify that the three paper size adjustments on the tray have been made correctly. Here's how: AirPrint is 's own 'built-'' mobile printing facility on iPad, iPhone and iPod touch. useful reference Error code 13.12.12 JAM IN LEFT ACCESSORY 13.12.0C Media stopped in the paper path.

blog.marketpoint.com mainly on the error in the LJ-4200 series but applies to the P4014 and relatives. HP say to replace it but equally you could try looking inside to see what might be wrong. Figure 21: Removing the paper If the paper has torn, or you still cannot remove it, click here for more information about clearing jams from the fuser area Reinstall the fuser If the above action does not solve the issue, contact HP or an authorized service provider.

If the message persists, contact HP Customer Support. LaserJet 9000/9040/9050 printer error code 80.XXXX The EIO accessory card in slot X encountered a critical error. Good Luck! Error code 80.XXX EMBEDDED JETDIRECT ERROR LaserJet 9000/9040/9050 80 An embedded Jet direct error occurred.

Fanning can cause misfeeds. See the catalogue. Press the (Up Arrow) and (Down Arrow) buttons to step through the instructions. Error 13.12.40 JAM IN LEFT ACCESSORY 13.12.28 Media is present in the offset module when power is turned on.

With a different mechanism the same error is seen with the 9000 series. Remove most of the paper from the tray except for a few sheets, and insert the tray into the product. Figure 13: Opening the top cover and removing the print cartridge Use the green handle to lift the paper-access plate. Why is my computer prompting me if I would like to accept a cookie?

Printing can continue, but behave unexpected in response to the changed settings. NOTE: Avoid spilling loose toner. Browse Tools Add Categories 60.3 Tray 3 lifter motor failure Author: Reference Number:AA-00582 Views: 2145 Created: 1969-12-31 07:00 pm Last Updated: 1969-12-31 07:00 pm 0 Rating/ Voters The tray 3 Open the top cover and remove the print cartridge.

CAUTION: Ensure that all jammed paper is removed before closing the cover or tray. LaserJet 9000/9040/9050 Fuser error and power supply failure!